Search results
1 – 4 of 4This article focuses on the low-velocity impact (LVI) output of carbon nanotubes (CNTs)’ reinforcement circular plates, considering agglomeration size effect and clumping of CNTs’…
Abstract
Purpose
This article focuses on the low-velocity impact (LVI) output of carbon nanotubes (CNTs)’ reinforcement circular plates, considering agglomeration size effect and clumping of CNTs’ inner side of the agglomerations.
Design/methodology/approach
A representative volume element (RVE) is used to determine the nanocomposite properties reinforced with agglomerated CNTs with random orientation. First-order shear deformation theory (FSDT) is used to obtain the motion equations of LVI analysis. These equations are handled by developing a Ritz method and Lagrangian mechanics. To extract the mass and stiffness matrices, terms with second and higher degrees are ignored.
Findings
Formulation validation is performed by providing various examples, including comparisons with other research and ABAQUS FE code. The effects of agglomeration size, clumping of CNTs’ inner side of the agglomerations, CNT volume fraction and impact location on the responses of impact load, projectile displacement and plate deflection are analytically studied. These achievements illuminate how the influence of agglomeration size is very small on the impact response. Also, the influence of clumping of CNTs’ inner side of the agglomerations is significant, and as it increases, the displacement values and impact time increase, and the impact force decreases.
Originality/value
In this article, to avoid additional calculations, the parameters of the mass matrix and the stiffness coefficients are linearized to obtain the equations of motion of the impact on the circular plate.
Details
Keywords
The purpose of this study is to investigate the strain rate effect on the problem of low-velocity impact (LVI) on a beam, including silicon nitride and stainless steel materials.
Abstract
Purpose
The purpose of this study is to investigate the strain rate effect on the problem of low-velocity impact (LVI) on a beam, including silicon nitride and stainless steel materials.
Design/methodology/approach
Based on the nonlinear Hertz impact mechanism, the energies related to the impactor and the beam are written, and motion equations are derived using the Lagrangian mechanics and Ritz method. The strain rate term is represented as a damping matrix in the equations of motion. In the issue of LVI on the silicon nitride and stainless steel beam, the effect of internal viscous damping coefficient in simply–simply and clamped–free boundary conditions are studied. Also, the influence of the volume fraction index in the range between zero and one and greater than one on the impact response is investigated.
Findings
The results make it clear that the strain rate parameter had little effect on the response in LVI. Also, an increase in the volume fraction index has led to a decrease in the contact force and an increase in the rebound velocity of the impactor.
Originality/value
The effect of strain rate on LVI is theoretically studied in this paper, while in most of the papers, this effect is investigated experimentally and numerically.
Details
Keywords
The purpose of this article is to investigate the porosity-dependent impact study of a plate with Winkler–Pasternak elastic foundations reinforced with agglomerated carbon…
Abstract
Purpose
The purpose of this article is to investigate the porosity-dependent impact study of a plate with Winkler–Pasternak elastic foundations reinforced with agglomerated carbon nanotubes (CNTs).
Design/methodology/approach
Based on the first-order shear deformation plate theory, the strain energy related to elastic foundations is added to system strain energy. Using separation of variables and Lagrangian generalized equations, the nonlinear and time-dependent motion equations are extracted.
Findings
Verification examples are fulfilled to prove the precision and effectiveness of the presented model. The impact outputs illustrate the effects of various distribution of CNTs porosity functions along the plate thickness direction, Winkler–Pasternak elastic foundations and different boundary conditions on the Hertz contact law, the plate center displacement, impactor displacement and impactor velocity.
Originality/value
This paper investigates the effect of Winkler–Pasternak elastic foundations on the functionally graded porous plate reinforced with agglomerated CNTs under impact loading.
Details
Keywords
Mohammad Hadi Moradi and Mehdi Ranjbar-Roeintan
The purpose of this research is to extract the natural frequencies of a circular plate containing a central hole reinforced with boron nitride nanotubes (BNNTs) and containing…
Abstract
Purpose
The purpose of this research is to extract the natural frequencies of a circular plate containing a central hole reinforced with boron nitride nanotubes (BNNTs) and containing piezoelectric layers.
Design/methodology/approach
A unit cell shall be taken into account for the simulation of BNNT's volume fraction. A rectangular micromechanical model is used to obtain the mechanical properties of unit cell of piezoelectric fiber-reinforced composite (PFRC). The three-dimensional (3D) elasticity method is presented to provide the relationship between displacements and stresses. The one-dimensional differential quadrature method (1D-DQM) and the state-space methodology are combined to create the semi-analytical technique. The state-space approach is utilized to implement an analytical resolution in the thickness direction, and 1D-DQM is used to implement an approximation solution in the radial direction. The composite consists of a polyvinylidene fluoride (PVDF) matrix and BNNTs as reinforcement.
Findings
A study on the PFRC is carried, likewise, the coefficients of its properties are obtained using a micro-electromechanical model known as the rectangular model. To implement the DQM, the plate was radially divided into sample points, each with eight state variables. The boundary situation and DQM are used to discretize the state-space equations, and the top and bottom application surface conditions are used to determine the natural frequencies of the plate. The model's convergence is assessed. Additionally, the dimensionless frequency is compared to earlier works and ABAQUS simulation in order to validate the model. Finally, the effects of the thickness, lateral wavenumber, boundary conditions and BNNT volume fraction on the annular plate's free vibration are investigated. The important achievements are that increasing the volume fraction of BNNTs increases the natural frequency.
Originality/value
The micromechanical “XY rectangle” model in PFRC along with the three-dimensional elasticity model is used in this literature to assess how the piezoelectric capabilities of BNNTs affect the free vibration of polymer-based composite annular plates under various boundary conditions.
Details